BIN95.com Industrial Training

04/22/2026

If you know someone just getting started in automation controls, here’s something that can genuinely help them.

Breaking into this field isn’t easy — schedules are tight, budgets are tighter, and hands‑on training isn’t always accessible. That’s why self‑paced, simulation‑based learning has become such a practical path for new technicians and career‑changers. It lets people build real skills on their own time, without sacrificing structure or quality.

Our Automation Control Specialist bundle was built for exactly that.
It includes a full set of Windows‑based training courses, each packed with interactive simulators so learners can practice real‑world scenarios rather than just watch videos.

Right now, the bundle is offered at over 30% off, and financing is available, which helps remove two of the biggest barriers people face: cost and scheduling.

SEE Details at https://bin95.com/automation-training-bundles/

If you know someone who’s been trying to get their foot in the door — or level up their skills — feel free to pass this along. It might be the resource they’ve been looking for.

Re-shares are appreciated, so more people in our industry can find these accessible training options.

04/14/2026

With Koldwater Technologies, LLC – I just got recognized as one of their top fans! 🎉

04/11/2026

Our Koldwater Technologies, LLC brand website just got updated. Check it out at kolwater.com to review the great deals. I hope you like it. Koldwater.com

and

03/15/2026

Plants run on fundamentals—and fundamentals are often the hardest knowledge to find.

That’s why I’ve started publishing the Process & Central Utilities Plant Essentials series online. It’s a 30‑page technician‑level reference covering the equipment and systems every plant depends on.

The first five articles are now available, including bolting, pressure equipment, PRVs, cooling towers, and steam traps. These are the topics that cause real downtime, real safety issues, and real maintenance headaches when misunderstood.

If you work in maintenance, reliability, operations, or industrial training, this series is built for you.
Explore the first five sections with the link in the comment section.

03/05/2026

Control Panel Design TIP:

Extend the PLC communication port outside the panel and include a power outlet for the technician's laptop. But place both in a locked enclosure so only authorized personnel may access.

Gain more valuable advice in the article 'Control Panel Design With Maintenance In Mind' at Control Design Magazine...
https://www.controldesign.com/control/plcs-pacs/article/11334683/machine-control-control-panel-design-with-maintenance-in-mind

03/02/2026

What Is a Solenoid? Simple Explanation Using MCTrainer 5 Simulations

A solenoid is one of the simplest—and most misunderstood—components in electrical and motor control systems. In this short lesson, we walk through the basics using interactive simulations from the MCTrainer 5 Motor Controls Course software.

You’ll see how a solenoid works, why the term can be confusing, and how the plunger‑type solenoid converts electromagnetic energy into mechanical motion. The video also shows the other common solenoid types used in industry: Clapper, Bell‑Crank, Vertical Action, and Horizontal Action.

This screen recording shows a student working through the built‑in simulations. Every module in MCTrainer 5 starts with the fundamentals, making the course ideal for high school students, vocational programs, and cross‑training maintenance mechanics who need a solid foundation in motor controls.

Learn more about the Motor Controls Trainer at https://bin95.com/vocational-training/electrical/electric-motors-and-controls-training.htm

02/25/2026

For those not familiar with Allen‑Bradley’s legacy PLC platforms…
AB‑PLC‑Cables‑Drivers: Excerpt 1

In the SLC family, the processor exchanges data with local I/O strictly over the backplane. Where things diverge is in the on‑board communication interfaces, which vary by processor model.

Depending on the series, you may see Ethernet/IP, DH+, DH‑485, or RS‑232 as the built‑in electrical connection points, with optional modules available for expanded or remote communication.

A critical distinction often overlooked in legacy systems:
Electrical connection ≠ communication capability.
RS‑232, RS‑422, RS‑485, and Ethernet define the physical layer, but they do not guarantee interoperability. Two devices can share the same port type and still fail to communicate if they do not implement the same protocol.

In practice:
• Devices using DF1 typically communicate over RS‑232.
• Devices using Profibus DP communicate over RS‑485.

Even within Profibus, variants like DP and FMS illustrate how protocol differences matter as much as the wiring.
This is why legacy AB systems require engineers to verify both the connection type and the protocol stack before assuming compatibility.

More protocol details coming in the next two slides.
If your team works with mixed‑generation hardware, feel free to share this.

02/14/2026

This vibration analysis training and certification is in accordance with ISO-18436-2 in Categories I, II, and III. All of these condition monitoring vibration analysis courses are available as scheduled live online classes via video conferencing or on-site in English or Spanish. Also, CAT I and II online vibration analysis courses are available as self-paced online video courses.

Learn and get certified in Category 1, 2, or 3. Earn more and watch your career take off! Companies, get your team certified and improve your operating cost. All courses are personally taught by Alan Friedman, who wrote and edited much of the Mobius Institute’s training material and trained many of their instructors. Alan is widely recognized as a leading authority in vibration analysis training and certification.

Learn More:
https://bin95.com/vibration-analyst/

Learn vibration analysis online with ISO‑18436‑2 VCAT I–III training and certification, personally taught by expert instructor Alan Friedman.

01/20/2026

You may have heard, but it is official now. Thanks to all on who helped fine-tune this one.
( https://www.reddit.com/r/IndustrialMaintenance/comments/1pz9sml/what_unit_conversions_do_you_use_most_at_work/ )

https://manufacturing.einnews.com/pr_news/879020595/bin95-launches-free-industrial-unit-conversion-chart-app-with-printable-tables-pdf

BIN95 released its free Unit Conversion Chart App, featuring 48 engineering conversion tools. Grouped by Automation, Maintenance, Electrical, and Mechanical.

01/17/2026

To be, or not to be into ? That is the question.

• To be a higher-paid ?
• To be an ?
• To be a certified ?
• To be a future ?
• To be a sought-after ?
• To be a skilled ?
• To be a respected ?
• To be a next-gen ?
• To be a versatile ?
• To be a career-ready ?

Can you think of any other occupational titles where PLC knowledge would be helpful?

01/08/2026

Press Release: Implementing Manufacturing Training Programs in 2026
https://www.einpresswire.com/article/873765089/empowering-career-technical-education-implementing-manufacturing-training-programs-in-2026

In preparation for February Career and Technical Education (CTE) Month.

Ahead of CTE Month, BIN95 highlights how automation and maintenance training prepare students for tomorrow’s workforce.