The Crossing Group

06/01/2026

Get your bikes tuned up and break out your brightest clothes... the 8th annual "Flashback" Family Fundo will be held on Saturday, September 12th 🚲

This all ages-event is the perfect opportunity to relive the 80s while you cycle, enjoy great food, and spend time with friends and family in support of the Kids with Cancer Society.

We'll see you there!

Register your team or donate at: https://kwc.akaraisin.com/ui/familyfundo2026

05/28/2026

Did you know that Direct Pipe technology can install pipe diameters ranging from 0.8 - 1.5 m (30 - 60 in)?

Our team at The Trenchless Company uses this methodology to install prefabricated pipelines and excavate boreholes in a single pass. However, if the project requires a pipeline with a diameter less than 0.8 m (30 in), Direct Pipe is still often a viable approach. We can first install a larger-diameter “sacrificial pipe” along the borehole path, then install the final pipe during an additional pass!

The Crossing Group's Direct Pipe® services provide a one pass installation solution with a high degree of steering accuracy. This trenchless method combines the advantages of microtunneling and HDD technology to excavate the required borehole and install prefabricated pipelines at the same time.

05/22/2026

Before ➡️ and after!

The first photo was taken ahead of horizontal directional drilling operations in Rhode Island, where our crews were tasked with installing 335 m (1100 ft) of HDPE conduit beneath an exit ramp.

The second photo was taken after project completion, showcasing how trenchless technology can capably work within a small footprint while causing minimal disturbances to the installation area!

05/14/2026

Here's to another successful intersect! 🤝

Our crews executed this HDD intersect by simultaneously using a 100,000 lb rig and a 220,000 lb rig to pass through the site's gravelly ground conditions. This photo shows the drill bits meeting in the middle upon the completion of both pilot bores.

05/07/2026

The Tunneling Company is hard at work in California, where they are using our advanced Hydro Hammer system to install a large-diameter surface casing.

Onsite crews will install 42-inch (1.1 m) steel casing to a depth of 200 ft (60 m) ahead of horizontal directional drilling — which will then be completed by their colleagues at The HDD Company. Hydro Hammer technology is designed for large diameter pipe and long drive lengths, making it the ideal solution for this surface casing installation!

04/30/2026

Another successful long-distance crossing from The Crossing Company!

Reaching a total distance of 1,747 meters, this horizontal directional drilling project utilized gyro steering to precisely navigate a right-of-way corridor with an existing hotline. Our crews overcame this technical challenge — along with an entry angle of 26 degrees — to safety install a 12-inch product line beneath the Beatton River in Northeast B.C.

04/22/2026

When encountering challenging ground conditions, our crews need to be versatile to ensure a successful crossing.

Here's a brief explanation of how a horizontal directional drilling (HDD) team might work through a site with soft surficial material over a bedrock layer!

04/15/2026

The Crossing Company is using a heavy HDD rig to complete a high angle installation near Pink Mountain, B.C. ⛰️

With 440,000 lbs of available push or pull force, this rig is reaming the pilot hole to an 18-inch diameter before installing the pipeline!

04/08/2026

The Crossing Company just completed a 1,133 meter drill and pull in Fort McMurray!

Our onsite team used a heavy HDD rig with a 12.25 inch drill bit to efficiently install the perforated steel pipe. They then installed a specialized water pump inside of the product pipe, marking the second successful dewatering well completed for this client.

Another outstanding accomplishment by everyone involved 👏

04/02/2026

You can't beat that view ✨

And no, it isn't photoshopped! One of our team members took this long-exposure photograph in northern Alberta, where we used multiple Light Rigs to install a 24-inch product pipe.