What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

EMACO Global LLC, Austin, TX (2026)

05/03/2026

Foam Fire Protection for Tank Farms

Tank farms store large volumes of flammable and combustible liquids, making them vulnerable to pool fires and v***r-related incidents. Once ignited, these fires can spread rapidly across containment areas and adjacent tanks.

Foam fire protection systems are commonly used in these environments due to their ability to suppress v***rs and prevent re-ignition. Designed in accordance with NFPA 11 and supported by NFPA 30, foam systems form a stable blanket over the fuel surface, isolating it from oxygen and reducing heat release.

Applications include fixed roof tanks, floating roof tanks, and bund areas. System effectiveness depends on proper foam type selection, application rates, and distribution methods aligned with tank geometry and hazard classification.

In tank farms, foam systems are essential for controlling large-scale liquid fires and limiting escalation.

EMACO's foam system design is approached as part of an integrated fire protection strategy coordinated with detection, hydrant networks, and structural protection systems to ensure compliance and operational continuity in high-hazard environments.

For inquiries:
𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 409 934-7581
📧 [email protected]
📍 5900 Balcones Drive #24732, Austin, TX 78731, United States

03/21/2026

Fire Safety Engineering for Chemical Facilities

Chemical facilities operate under complex fire risk conditions created by flammable liquids, reactive materials, pressurized process systems, and continuous operations. In these environments, effective fire protection depends on engineering decisions based on credible fire scenarios and material behavior, rather than generic system layouts.

Fire safety engineering for chemical plants is typically developed using the NFPA framework, where each standard addresses a specific hazard type:
NFPA 11 for foam-based protection of flammable liquid fires, NFPA 13 for sprinkler system design, NFPA 15 for water spray and deluge systems used in cooling and exposure protection, NFPA 30 for flammable and combustible liquid storage and handling, and NFPA 400 for hazardous materials classification and control.

Protection strategies are then selected to match the identified risks, commonly including:
• Foam suppression systems to control spill and pool fires and suppress v***r release
• Water spray or deluge systems to cool equipment, protect exposures, and limit fire escalation
• Clean agent systems for control rooms, laboratories, and critical electrical areas where water discharge is not suitable

Applications
In chemical facilities, fire safety measures are developed for distinct operational zones, including process units, tank farms, pump and compressor areas, loading and unloading facilities, control buildings, laboratories, and supporting utility spaces. Each location presents a different fire risk profile, influenced by the type of chemicals handled, operating pressures and temperatures, occupancy levels, and the potential for fire escalation or exposure to adjacent equipment. Fire protection strategies are therefore tailored to these conditions to ensure effective risk control and coordinated emergency response across the facility.

For inquiries:
𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 409 934-7581
📧 [email protected]
📍 5900 Balcones Drive #24732; Austin, TX 78731, United States.

02/22/2026

Kitchen Fire Suppression Systems for Commercial Cooking Environments

Commercial kitchens operate under continuous heat exposure, open flames, and grease-laden v***rs. These conditions create a fire risk that can escalate quickly, particularly where cooking oils and fats are involved. Conventional water-based systems are not suitable for these hazards, as they may spread burning oil rather than suppress it.

Kitchen fire suppression systems are specifically engineered for this environment. Installed within exhaust hoods and ductwork, they use a wet chemical agent that reacts with hot cooking media to suppress flames, cool surfaces, and create a barrier that helps prevent re-ignition. Systems are typically activated automatically through heat detection mechanisms, with manual pull stations provided for immediate response.

Design and installation follow the technical framework of NFPA 96 for commercial cooking operations and NFPA 17A for wet chemical extinguishing systems. Proper coverage of appliances, plenum chambers, ducts, and fuel shut-off integration ensures the system performs as intended during an incident.

Routine inspection and semi-annual maintenance are essential to maintain reliability, particularly in high-volume kitchens where grease accumulation and operational wear can affect performance.

In commercial food service facilities, a properly engineered kitchen suppression system is a practical and necessary layer of fire risk management, supporting life safety, asset protection, and operational continuity.

For inquiries:
𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 409 934-7581
📧 [email protected]
📍 5900 Balcones Drive #24732, Austin, TX 78731, United States

02/09/2026

Deluge Systems for High-Hazard Industrial Areas

In high-hazard industrial environments, fire development can be rapid and severe. Facilities handling flammable liquids, pressurized gases, or high-heat processes require protection methods capable of delivering immediate, large-scale water application.

Deluge systems are designed for these conditions. Unlike closed-head sprinkler systems, deluge systems use open nozzles connected to a piping network that discharges simultaneously upon activation. This approach allows rapid water distribution across high-risk areas where fire spread potential is significant.
Designed in accordance with NFPA 15 for water spray fixed systems and coordinated with detection systems per NFPA 72, deluge installations are commonly used to provide equipment cooling, exposure protection, and fire control in process plants and industrial facilities.

Deluge systems are typically applied in process units, transformer protection, turbine enclosures, conveyor systems, loading racks, and areas where flammable liquid or gas release could result in fast fire escalation. System design considers hazard type, discharge density, nozzle arrangement, and water supply reliability to ensure effective coverage.

In high-hazard zones, response time and distribution pattern determine performance. Deluge systems are engineered to address both.

For inquiries:

𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 409 934-7581
📧 [email protected]
📍 5900 Balcones Drive #24732, Austin, TX 78731, United States

,

01/31/2026

Hydrant Systems for Warehouse Fire Protection

Warehouses present complex fire scenarios due to high fuel loads, large floor areas, and vertical storage arrangements. When a fire grows beyond the control of automatic suppression, effective manual firefighting depends on immediate access to a reliable water supply. Hydrant systems form the backbone of this response by providing adequate fire flow, pressure, and operational reach.

Designed in accordance with NFPA 24 and coordinated with sprinkler and standpipe systems, hydrant networks support sustained firefighting across warehouse yards, perimeter roads, loading and unloading areas, and fire brigade access routes. Their layout and spacing are critical to ensuring hose coverage, firefighter mobility, and continuous water availability during extended incidents.

Hydrant systems are typically applied across warehouse yards, perimeter roads, loading and unloading areas, external storage zones, and fire brigade access points. They are designed to support manual firefighting operations where extended hose reach, sustained water flow, and flexible response are required, particularly in large logistics centers, high-rack storage facilities, cold storage warehouses, and distribution hubs.

In large logistics centers, high-rack storage facilities, and distribution warehouses, hydrant systems remain essential for maintaining fire control when conditions exceed initial suppression capacity.

For inquiries:
𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 409 934-7581
📧 [email protected]
📍 5900 Balcones Drive #24732; Austin, TX 78731, United States

01/25/2026

Fire Hose Reels as First-Response Fire Protection

Fire hose reels are designed to provide an immediate and continuous water supply during the early stages of a fire. Installed in commercial buildings, industrial facilities, and public spaces, they allow occupants or trained personnel to respond quickly before a fire escalates.

EMACO fire hose reels are developed for reliable operation, controlled water delivery, and ease of use. By connecting directly to the building’s fire water network, they support effective first-response firefighting and contribute to overall system readiness and on-site safety.

For inquiries:
𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 409 934-7581
📧 [email protected]
📍 5900 Balcones Drive #24732; Austin, TX 78731, United States.

01/09/2026

Power Plant Fire Protection: A Critical Requirement

Power plants bring together mechanical equipment, electrical systems, and fuel-related risks in one environment. Areas such as turbine halls, transformer yards, control rooms, battery storage, and fuel handling zones all require fire protection designed specifically for their risks.

Fire protection in power facilities typically combines:

• Clean agent systems for control rooms, electrical spaces, and battery storage
• Foam suppression for fuel handling and transformer areas
• Water-based systems for plant structures and general hazard areas

Applying the right protection across gas, steam, and combined-cycle facilities helps control fire spread, reduce escalation, and support safe, continuous operation. EMACO fire protection components are developed to perform reliably in these demanding industrial environments.

For inquiries:
𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 409 934-7581
📩 [email protected]
📍 5900 Balcones Drive #24732; Austin, TX 78731, United States.

12/31/2025

Cheers to a year of new opportunities, stronger collaborations, and continued excellence.

12/21/2025

Aviation Foam Fire Suppression Systems

Foam fire suppression is a primary protection method for aircraft hangars and aviation fuel handling areas due to the rapid escalation of Class B fuel fires.

EMACO designs and implements foam-based fire suppression systems in accordance with NFPA 11 and NFPA 409, with layouts developed specifically for aviation risk profiles.

Our systems are engineered to:

• Achieve required discharge densities for aviation fuel fires

• Provide effective v***r suppression

• Limit fire spread and re-ignition

• Integrate with hangar and apron fire protection infrastructure

These foam systems are applied in aircraft maintenance hangars, fueling stations, fuel storage areas, refueling aprons, and high-risk aviation service zones, where rapid fire control and post-suppression stability are required to support safe emergency response and operational recovery.

Design considerations include hazard classification, foam type selection, application rates, and system response time to ensure reliable performance in operational aviation environments.

𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 863-316-5919
📩 [email protected]
📍 3118 Beckett Way, Lakeland, FL 33810, United States

12/17/2025

The EMACO Hose Valve is a robust, high-quality angle valve engineered for effective water flow control in fire protection systems. Featuring a rising stem design and corrosion-resistant bronze body, this valve is specifically built to meet the requirements of wet standpipe systems and hose rack units in commercial and industrial buildings.

Typical Applications:
This valve is commonly installed in fire hose racks and wet standpipe systems, making it an essential component in fire safety for high-rise buildings, factories, warehouses, and institutional structures.

Key Technical Features:
• UL Listed to ensure compliance with fire protection standards
• Angle pattern with rising stem for precision operation
• Constructed from high-grade bronze for corrosion resistance
• Threaded NPT connections: 2½” inlet x 1½” outlet
• Designed for seamless integration into NFPA-compliant fire protection systems
• Whether for new installations or system upgrades, this valve offers reliable performance in critical environments.

Explore full product specifications:
https://emacoglobal.com/all-products/emaco-hose-valve-ul-listed/

𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 863-316-5919
📩 [email protected]
📍 3118 Beckett Way, Lakeland, FL 33810, United States

12/08/2025

The EMACO LPCB-approved Breeching Inlet is a critical component in fire protection systems, designed to allow fire services to quickly inject water into a building’s internal fire hydrant or riser system. Built to ensure fast connection, high flow, and operational reliability, it is suited for high-rise and commercial structures.

Application:
Installed at accessible exterior points of buildings, this breeching inlet provides a vital link for firefighters to supply water directly into internal wet riser or standpipe systems during emergencies.

Key Benefits:
• LPCB certified for performance and reliability
• Ensures rapid water supply in high-rise firefighting scenarios
• Compatible with standard firefighting hoses and equipment
• Designed for easy operation and long service life

Available Variants:
• 2-Way and 4-Way configurations
• Models available with or without a non-return valve
• Compatible with vertical or horizontal mounting plates

Key Features:
• Body made from ductile iron with corrosion-resistant epoxy finish
• Gunmetal or brass inlets and non-return valves for durability
• Known as a fire department connection (FDC)
• Supplied with blank caps and chains for dust protection
• Conforms to BS 5041 Part 3 and approved by LPCB

𝐕𝐢𝐬𝐢𝐭 𝐟𝐨𝐫 𝐦𝐨𝐫𝐞 𝐝𝐞𝐭𝐚𝐢𝐥𝐬: https://emacoglobal.com/all-products/emaco-breeching-inlet-lpcb/

𝐄𝐌𝐀𝐂𝐎 𝐆𝐥𝐨𝐛𝐚𝐥 𝐋𝐋𝐂
🌐 emacoglobal.com
📳 +1 863-316-5919
📩 [email protected]
📍 3118 Beckett Way, Lakeland, FL 33810, United States

EMACO Global LLC

05/03/2026

03/21/2026

02/22/2026

02/09/2026

01/31/2026

01/25/2026

01/09/2026

12/31/2025

12/21/2025

12/17/2025

12/08/2025

Address

Opening Hours

Website

Alerts

Contact The Organization

Shortcuts

Share

Category

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm